VP60003 is a 6U VPX single board, equipped with Intel Xeon D-15xx processor, and 7-10 years of life cycle. The VP60003 supports the Intel Xeon D-1577 (16x 1.3GHz) processor, and its powerful processing power is sufficient for high-throughput vector and floating-point operations. VP60003 also supports Intel Turbo technology, CPU instantaneous maximum operating frequency up to 2.7GHz. So users do not need to meet the system peak computing power requirements and increase the complexity of system configuration and cost.
The VP60003 provides four serial I/O (SRIO) x4 links for VPX data plane communication, two x8 PCIe links for VPX expansion Plane communication, 4 Gigabit Ethernet.The link is used for VPX control Plane communication. Forward two-way 10Gb SFP + optical port can be achieved between the system of large data channels and application data remote transmission. Rich data interoperability makes it easy for users to build machine or system-level solutions.
VP60003 onboard maximum support DDR4 32GB ECC memory to meet the high reliability requirements of embedded servers; onboard SATA interface SSD maximum capacity of 64GB SLC, while supporting 2.5-inch hard drive; plus the whole board with reinforced cold design and wide temperature The ability to work (-40 °C to 70 °C) makes it unnecessary for users to worry about job stability in harsh environments. This feature makes the VP60003 particularly suitable for mission critical areas.
The VP60003 can also be equipped with a FSX High Performance Standalone Display Controller XM61000 or XM61001 (GPGPU) for specific user requirements for high-end embedded display processing.
We also provide VP60003 with rich software driver (BSP) support, including VxWorks, Linux, Windows, etc., which reduces the workload of system integration workloads and end product development and significantly reduces time-to-market.
VP60003 other interfaces are: 1 channel HDMI display, 3 serial port, 7 USB, 5 SATA III and so on.
Areas of application:
Communications, intelligence analysis and command control, radar / sonar, medical imaging and audio and video surveillance.
Intel Xeon D-15xx Processor
With the Intel Xeon D-15xx Processor, outfitted with 3/4/6/8MB Intel Smart Cache, the VP60003 Server was built to handle the most complex processing tasks.
VP60003 has exclusive mechanical design and efficient thermal pad for conducting heat from CPU and other components efficiently. VP60003 can operate under 100% CPU loading in wide temperature operating environments ranging from -40°C to 70°C.
The VP60003 is equipped with a rich interface for industrial control. The accessible I/O ports include USB3.0/2.0, GPIO, SATA3, LEDS, VGA, LVDS, Ethernet, PCIe, PS2, SRIO Port and RS232/485/422.
| VITA 46, VITA 65
Open VPX MOD6-PAY-4F1Q2U2T-12.2.1-11 Profile Compliant
| Intel Xeon Processor D-15xx
Up to 16 Cores/32HT, 24MB Cache
| Up to 32GB DDR4 SDRAM
Dual Channel With ECC
|Onboard SSD (Up to 64GB SLC Or 128GB MLC Optional)
|Windows 7/8.1, Windows Server 2008 R2 / 2012 R2, Linux , VxWorks 7.x
| VGA Interface On VPX P4
HDMI Interface On Front Panel
| One Intel 82580EB Quad GbE Controller
One Intel i210IT GbE Controller
|2.5” SATA Disk
| 2 x8 PCIe 3.0 to VPX P2 connector
x8 PCIe 3.0 to XMC connector
4 x4 PCIe 2.0 to PCIe to SRIO Bridge
x4 PCIe 2.0 to Intel 82580 GbE Controller
x1 PCIe 2.0 to Intel i210 GbE Controller
| 4 x4 SRIO Rev 2.1 to VPX P1 Connector
Up to 5Gbps
| x8 PCIe XMC Card
P2W1-X24S+X8D+X12D Rear I / O
XM61000(XM61001) Is Recommended For Display
|Front I/O Interface
1 x USB3.0 + 1 x USB2.0
1 x GbE: RJ-45 connectors
RS232: RJ-45 connector
2 x SFP+(10Gbps)
LEDs, RST BTN
|Rear I/O Interface
| P1 4 x SRIOx4 Rev2.1
P2 2 x PCIex8 Gen3, 8 x GPIOs
P3 XMC Rear I / O, 8 x GPIOs
P4 4 GbE(2 x 1000BASE-T+2 x 1000 BASE-BX), 2 x RS232/422/485, VGA
P5 4 x SATA III, 2 x USB3.0 + 3 x USB2.0, PS/2
|MECHANICAL AND ENVIRONMENTAL
|0°C ~ 60°C & -40°C ~ 70°C
|-40°C ~ 85°C (Without Battery)
|95% Relative Humidity, At 40°C